Tới nội dung chính

AI TIPS #003 | Miniature to Reality

Từ xe mô hình đến TVC 20 giây

ThinhHocAI · Hướng dẫn thực hành · ChatGPT & Omniflash

Ảnh tham chiếu xe cho hướng dẫn Miniature to Reality
BƯỚC 01

Tạo ảnh ngoại thất
& video biến hình xe

Công cụ: ChatGPT tạo ảnh & Omniflash tạo video

Prompt tạo ảnh ngoại thất

PROMPT 01 / NGOẠI THẤT
Create an exterior reference sheet of ONE consistent vehicle using the uploaded photographs. Landscape 16:9, exactly five views: front, side profile, and rear across the top row; front-left three-quarter and rear-left three-quarter views across the bottom row. Use generous spacing without overlap. Show the entire car in every view. Preserve the exact paint, body proportions, wheels, tires, lights, grille, glazing, mirrors, logos, and trim. All views must show the same model and specification. Do not add accessories or redesign details.
Use a white or very light-gray studio background, soft neutral lighting, natural colors, and tire contact shadows. Photorealistic, sharp detail. No people, captions, panel numbers, or watermarks. Preserve existing vehicle emblems.
Trước khi thực hành

Tải ảnh tham chiếu lên công cụ trước khi sử dụng prompt. Kiểm tra độ nhất quán của xe giữa các góc nhìn.

Prompt tạo video mô hình thành xe thật

PROMPT 02 / VIDEO BIẾN HÌNH XE
Create a 10-second photorealistic cinematic video in landscape 16:9. One continuous shot transitions from a stationary miniature display car inside a moving passenger coach to a full-size car driving along the coast of central Vietnam.
REFERENCE: Use the uploaded vehicle reference only to preserve the exact design, paint, body proportions, wheels, lights, and materials. Show one instance of this car. Never display the reference sheet, its grid, or studio background.
CAMERA AND COMPOSITION: Maintain a rear-left three-quarter view, with the car’s nose pointing toward screen right. The car occupies approximately 55–60% of the frame width. Preserve its screen position, orientation, and apparent size through the transition. No camera orbit or sudden zoom.
0–3 SECONDS — STATIONARY MINIATURE: A 15 cm collectible display car rests securely on the interior window ledge of a moving passenger coach.
The miniature has fixed, non-rotating display wheels during this section. Its body and all four wheels remain completely stationary relative to the ledge. Each wheel spoke stays at exactly the same angular position. Each tire touches the same point on the ledge throughout. No rolling, sliding, drifting, wheel rotation, or rotational motion blur.
The camera is rigidly fixed inside the coach. The camera, window frame, ledge, and miniature maintain their positions relative to one another. No camera shake or tracking movement around the miniature. Only the countryside outside the window moves backward: tropical vegetation, green hills, and glimpses of the blue sea, with natural background motion blur. Keep the miniature and its wheel spokes sharp. Clearly show the ledge and window frame to establish its small scale. 
3–5 SECONDS — TRANSITION THROUGH DARKNESS: The coach enters a short hillside tunnel. Daylight rapidly fades while the miniature’s silhouette remains faintly visible. Keep its wheels motionless while it is still on the ledge. Conceal the change of scale and environment in the darkness: the ledge and window frame disappear, and asphalt with lane markings replaces the surface beneath the tires. As tunnel lighting reveals the vehicle, it is now a full-size car on the roadway. Only after this change is complete do its wheels begin rotating naturally. The fixed display-wheel condition applies only to the
miniature, not to the full-size car. Preserve the vehicle’s shape, screen position, viewing angle, and apparent size. No visible inflation, stretching, mechanical transformation, or position jump.
5–10 SECONDS — FULL-SIZE CAR IN MOTION: The camera now tracks alongside the full-size car at matching speed, maintaining the rear-left three-quarter view. The car passes through the nearby tunnel exit and continues along a central Vietnamese coastal road. Blue sea, tropical green hills, and roadside guardrails stream backward. Soft late-afternoon sunlight reflects across the paint. Wheels rotate naturally, tires maintain firm road contact, and the suspension moves subtly. End with the car still driving steadily, fully visible in frame.
AUDIO: Begin with subdued passenger-coach road noise. Transition into appropriate vehicle operating sounds, tire noise, and coastal wind. No exaggerated engine roar, background music, or dialogue.
No visible hard cuts, montage, split screens, duplicate vehicles, vehicle redesign, text, or watermarks.
BƯỚC 02

Tạo ảnh nội thất
& video TVC

Công cụ: ChatGPT tạo ảnh & Omniflash tạo video

Ảnh minh họa hướng dẫn tạo TVC xe

Ảnh từ bộ hướng dẫn gốc trên Sanity.

Prompt tạo ảnh nội thất

PROMPT 03 / ẢNH NỘI THẤT
Create a premium automotive reference sheet with exactly four panels using the uploaded exterior, cockpit, and rear-cabin photographs. All panels must show ONE consistent vehicle with the same trim specification and color configuration.
LAYOUT: One landscape 16:9 image in a 2-column × 2-row grid. Four equal panels separated by thin white gutters. Photorealistic automotive advertising photography, high resolution, clearly readable detail.
PANEL 1 - TOP LEFT: Full exterior in a rear-left three-quarter view, showing the rear, left side, and wheels. The nose points toward screen right. Light-gray studio background, soft lighting, natural tire contact shadows. Keep the entire car visible.
PANEL 2 - TOP RIGHT: Cockpit viewed from the front passenger side toward the steering wheel and dashboard. Clearly show the steering wheel, displays, center controls, materials, and dashboard contours. Follow the supplied interior photograph closely; retain an angle close to the original when
needed to preserve details.
PANEL 3 - BOTTOM LEFT: Rear cabin viewed through an open rear door. Preserve the seats, headrests, stitching, armrest, and door trim. Include only equipment visible in the references. If the armrest is folded away, preserve that state. Use soft natural illumination that reveals the materials.
PANEL 4 - BOTTOM RIGHT: Full exterior in a front-left three-quarter view, showing the front fascia, headlights, grille, left side, and wheels. Match panel 1's studio background and lighting. Keep the entire car visible.
CONSISTENCY: Preserve paint, proportions, lights, wheels, logos, and exterior details. Preserve interior colors, seat count and arrangement, steering-wheel position, display shapes, dashboard layout, materials, and stitching. Do not invent extra screens, a sunroof, decorative lighting, or equipment absent from the references. Do not mix interiors from different models. Use neutral lighting and natural colors without strong cinematic grading.
No people, captions, panel numbers, or watermarks. Preserve the vehicle's existing emblems and logos.

Prompt tạo video TVC

PROMPT 04 / VIDEO TVC
Create a 10-second photorealistic premium car commercial in 16:9: six shots, five clean hard cuts. Brisk exterior editing, slower interiors, then a calm hero shot.
REFERENCE: One vehicle throughout. The four-panel sheet shows rear exterior (top left), cockpit (top right), rear cabin (bottom left), and front exterior (bottom right). Preserve paint, proportions, wheels, lights, interior
layout, materials, and equipment. Never show the grid or studio background. If supplied, match the previous clip's final frame for lighting and travel direction.
SETTING: Central Vietnamese coastal road, blue sea, tropical green hills, soft late-afternoon sunlight.
SHOT 1 | 0.0-1.2 s: Car already driving, rear-left three-quarter tracking view, nose pointing screen right. Entire car visible, background streaming backward. No freeze or repeated introduction.
HARD CUT. SHOT 2 | 1.2-2.2 s: Close-up of the rotating front-left wheel, camera at hub height tracking at car speed. Exact rim design, natural rotational blur, firm tire contact, asphalt streaming beneath. No reverse
rotation or sliding.
HARD CUT. SHOT 3 | 2.2-3.2 s: Close-up of the front-left headlight and grille while driving. Stable tracking, sunlight gliding over glass and paint. Preserve light geometry; no flashing.
HARD CUT. SHOT 4 | 3.2-5.2 s: Car now parked. Empty cockpit from the front passenger side toward the steering wheel and dashboard. Short, slow lateral slide. Exact referenced displays and materials, no invented equipment. Scenery outside remains still.
HARD CUT. SHOT 5 | 5.2-7.0 s: Rear cabin through an already-open rear door. Gentle push toward seats, stitching, headrests, and armrest in their referenced state. Soft natural light. No people or door-opening animation.
HARD CUT. SHOT 6 | 7.0-10.0 s: Entire car parked on a level paved coastal turnout, clear of the active road, overlooking the sea. Front-left three-quarter view, all doors closed, wheels still. Subtle lateral slide and warm reflections. Ease to a composed hold for the final second; the sea keeps moving.
AUDIO: Continuous tire and wind noise across shots 1-3, quiet cabin ambience in shots 4-5, gentle sea breeze in shot 6. No music or dialogue. Moving shots do not clearly reveal the cabin; show the empty cockpit
only after parking.
Full-screen shots only. No dissolves, morphing, camera passing through glass or bodywork, excessive orbiting, duplicate cars, redesign, text, or watermarks.

HỌC KÈM AI 1–1 CÙNG THỊNH Bớt mò mẫm.
Có Thịnh đồng hành.

Học từ điều bạn muốn làm: tạo ảnh, làm video hay ứng dụng AI vào công việc. Thịnh hướng dẫn từng bước, cùng bạn thực hành trên nhu cầu thực tế.

Liên hệ tư vấn

Nhắn Thịnh qua Zalo để trao đổi mục tiêu học của bạn.